ATEX T rotary switches and P switch-disconnectors up to 100 A

Equipment for use in dust explosion hazardous areas (Zone 22)

[picture of P1 ATEX Switch-Disconnector] [picture of P3-63 ATEX Switch-Disconnector] [picture of P3-100 ATEX Switch-Disconnector]
Moeller now offers T rotary switches (from 20 A to 100 A) and P switch-disconnectors (from 25 A to 100 A) conforming to the ATEX directive 94/9 EC from 01/07/2003

The devices are marked with equipment designation EX II3D IP5X T90°C (Dust-EX) and are Ex-zone 22 approved for use in dust explosion hazardous areas.

The following ATEX switches are available:

ATEX T rotary switch
Type:

T0-.../I1
T3-.../I2
T5B-.../I4
T5-.../I5

ATEX P switch-disconnectors
Type:

P1-25/I2
P1-32/I2
P3-63/I4
P3-100/I5

Safety in dust explosion hazardous areas

Processes require power. You now have these ATEX switches from Moeller to satisfy the demands of your customers with regard to main switch, maintenance switch and manual override switch requirements in their machines and systems. The installation and application notes for use in machines and systems must be observed.

Further technical information can be found in the installation instructions:

ATEX Switch Installation Instructions (236 KB)

Consequent assurance of safety

The fields of applications for ATEX switches include all manufacturing fields where deposits of dust are an issue. These include, for example: mills, facilities where metals are ground as well as the wood processing, cement or aluminium industries.

ATEX certificate for Moeller rotary switches and switch-disconnectors

Moeller ATEX switches feature the "EC prototype test certificates for main switch, maintenance switch and manual override switches for the current range from 20 A to 100 A". Approved for use in dust explosion hazardous areas conform to category II 3D, with the test number: BVS 04E 106X.

EC prototype test for rotary switches and switch-disconnector

(1 MB)

This page last updated: 22 September 2007