Related Pages
Easy 500
Easy 700
MFD Display
Easy Expansion
Easy FieldBus
Easy SmartWire
Easy/MFD Downloads
Sitemap
Home Page
easy Control – High Performance easy
![[picture of Easy Control unit]](images/easy_control.jpg)
The Easy Control EC4P brings a new level of capability to the easy range, combining the simplicity of the Easy system using local expansion and in-built networking facilities, with the power of internationally recognised programming standards.
Offering both Easy-net and CanOpen interfaces, the EC4P can be used with the standard easy system as well as in combination with wider automation systems and PLCs.
Utilising the IEC1131-3 based programming software, the Easysoft CoDeSys package enables multiple programming language support as well as features such as off-line simulation and graphical test functions to be realised.
- Local expansion using the easy I/O expansion units
- Network up to 8 units over 1000 m
- High level network interfaces for: Profibus, CanOpen, DeviceNet, Ethernet
- Programmable using IEC1131-3 CoDeSys software
- Memory cards available
Technical Specification
| Part Number | Supply | I/P | O/P | Type | Analog | Display | An O/P |
|---|---|---|---|---|---|---|---|
| EC4P-221-MTXD1 | 24 V DC | 12 | 8 | Trans | 4 | Y | N |
| EC4P-221-MTXX1 | 24 V DC | 12 | 8 | Trans | 4 | N | N |
| EC4P-221-MRXD1 | 24 V DC | 12 | 6 | Relay | 4 | Y | N |
| EC4P-221-MRXX1 | 24 V DC | 12 | 6 | Relay | 4 | N | N |
| EC4P-221-MTAD1 | 24 V DC | 12 | 8 | Trans | 4 | Y | Y |
| EC4P-221-MTAX1 | 24 V DC | 12 | 8 | Trans | 4 | N | Y |
| EC4P-221-MRAD1 | 24 V DC | 12 | 6 | Relay | 4 | Y | Y |
| EC4P-221-MRAX1 | 24 V DC | 12 | 6 | Relay | 4 | N | Y |
Display, operate, switch, control, regulate and communicate.
(2.8MB)
Request literature on these
products
 |
Exchange information with other users in the easy-Forum. (Note: You will exit www.moeller.co.uk with this link. Moeller Electric UK does not assume any responsibility for the content and design of the linked pages.) |
