Soft Starter DS6

[picture of DS6 Soft Starter]

Controlled switching and starting

With its compact design, the DS6 provides a two phase controlled motor start for assigned ratings from 18.5 to 110 kW, with the same simple handling features as the DS4.

The performance spectrum is spread across just two sizes. The dimensions and the terminals correspond with the tried and tested Moeller standard from the circuit-breakers NZM1 (up to 55 kW) and NZM2 (up to 110 kW).

Features

Simple handling.
Connection terminals suitable for circuit-breakers (NZM1, NZM2).
Can be grouped side-by-side.
Degree of protection IP 20.
Status indication via LED.
CE conformity.
UL, CSA and CCC approvals.

Application Examples

Three-phase inductive loads.
Noiseless and soft switching of motor starters in transport and conveyor belts.
Soft starting of pumps reduces the load on the entire installation (water impact).
Solid-state switching of pumps in the extreme environments of chemical plants and filling stations.
Smooth start that reduces wear on V-belts in fan drives.

Power supply
230–460 V ±10 %, 50/60 Hz

Control voltage
24 VDC

Performance range
18.5–110 kW (with internal bypass)

Performance characteristic
DS6-340-...-MX
AC53a, 10 starts per hour with 3-times starting current for 5 seconds

The DS6 for standard applications up to 15 kW

DS6-340-...-MX
Motor starter with internal bypass contacts 18.5 to 110 kW

DOL-start, without delay (t_START)

Operation with acceleration and delay time (t_START, t_STOP)

Operation with direction of rotation

Reversing starter, two directions of rotation

Request literature on these products

This page last updated: 13 September 2007